Search equipment, find a part, book a service or search a keyword

Search equipment, find a part, book a service or search a keyword

The load restraint hardware you need to keep freight secure.

Tie downs, chain sets, hooks, twitches, and ratchet binders for trucks, trailers, and heavy transport.

Overview

Rated hardware for heavy transport.

TRT stocks a complete load restraint range for truck and trailer operations, including ratchet tie downs, chain and hook sets, twitches, and double hook ratchets.

Same-day dispatch is available across New Zealand and Australia.


Products

This range covers the hardware used to secure loads on trucks, trailers, and heavy transport combinations across freight, construction, and agricultural operations. Every item is stocked and available for fast dispatch through TRT's New Zealand and Australian branches.

  • 50mm Ratchet Tie Downs

    The wide handle ratchet buckle makes tensioning fast and positive, even with gloves on.

    Hook and keeper ends hold position under load, and wearsleeves protect the strap at the highest-wear contact points so it stays in service longer between replacements.

  • Chain and Hooks

    Supplied as a complete 8mm x 9M set with two grab hooks fitted, ready to use out of the bucket.

    Bulk chain is also available for operators who need to cut and configure their own lengths on the job.

  • Grab Hook

    A single-point hook for anchoring chain to load rings or trailer tie-down points.

    Keeps the chain positioned and prevents it from backing off under the load movement that comes with heavy freight in transit.

  • Twitches

    A lever-action chain binder for applying and holding tension on chain runs.

    Available in two size ranges, 7-8mm and 8-10mm, to suit the chain diameters most commonly used in heavy transport securing.

  • Spring Loaded Twitches

    Spring-loaded to compensate for chain slack as loads move in transit. The mechanism holds tension automatically, reducing the frequency of stops to re-check and re-tighten.

  • Double Hook Ratchet

    A ratchet-action chain binder with a hook at each end for fast attachment to chain. The ratchet mechanism applies and holds tension securely, and releases cleanly when the load reaches its destination.


Specifications

The full range, ready to order.

TRT's load restraint range covers the hardware used to secure loads on trucks and trailers across freight, construction, and agricultural operations.

From ratchet tie downs and chain sets through to grab hooks, twitches, spring-loaded twitches, and double hook ratchets.

All items are stocked across branches in New Zealand and Australia, with same-day dispatch available.

Details
50mm Ratchet Tie Downs
Wide handle ratchet buckle, hook and keeper ends, wearsleeves. 2,500kg lashing capacity, 5,000kg min. breaking load. 8.0m mainstrap, 0.4m tailstrap.
Chain and Hooks
8mm x 9M chain with 2 grab hooks. Bulk chain available. Part code 40552
Grab Hook
Single-point hook for chain anchor points. Part code HG10
Twitches
Lever-action chain binder. Part codes HTG8 (7-8mm) / CKHTG10 (8-10mm)
Twitches Spring Loaded
Spring-loaded binder, maintains tension as load settles. Part code 685GHLB (6-8mm)
Double Hook Ratchet
Ratchet-action binder with hook at each end. Part code HTGD
Plastic Corner Board
Load edge protection.

Image Gallery

Need load restraint hardware fast?

The TRT parts team can confirm stock, advise on the right product for your application, and arrange same-day dispatch from branches across New Zealand and Australia.

Send through your enquiry and we will get back to you fast.